Static Colors; Custom Color Mixing; Selecting The Dimmer Mode; Infrared Remote Control - Chauvet SlimPAR Hex 3 IRC User Manual

Static Colors

To select a preset static color, do the following:
1.
2.
3.
4.
Custom Color
To custom mix a color, follow the instructions below:
1.
Mixing
2.
3.
4.
5.
6.
Selecting the
To select the dimmer mode, do the following:
1.
Dimmer Mode
2.
3.
4.
Infrared Remote
The SlimPAR™ HEX 3 IRC is fully compatible with the Infrared Remote Control (IRC)
from CHAUVET®. To enable use with the IRC, follow the instructions below:
Control
1.
2.
3.
4.
Page 14 of 19
Press <MENU> repeatedly until C-- shows on the display.
Press <ENTER> and C 1—C 63 shows on the display.
Use <UP> or <DOWN> to select the desired preset color:
Press <ENTER>.
Press <MENU> repeatedly until U-- shows on the display.
Press <ENTER> and one of the following colors shows on the display: rXXX (red),
gXXX (green), bXXX (blue), AXXX (amber), WXXX (white), or PXXX (ultraviolet).
Press <ENTER> repeatedly to select the desired color.
Use <UP> or <DOWN> to select the desired color value (0–255).
NOTE: Selecting 0 will turn the color off.
Press <ENTER> to select color value and continue to the next color.
Repeat steps 3 to 5 until you create your desired color.
Press <MENU> repeatedly until dIM shows on the display.
Press <ENTER> and one of the following shows on the display:
·
OFF (dimmer speed off)
·
dIM1 (dimmer mode 1, fast speed)
·
dIM2 (dimmer mode 2, middle speed)
·
dIM3 (dimmer mode 3, slow speed)
Use <UP> or <DOWN> to select the desired dimmer mode.
Press <ENTER>.
Press <MENU> repeatedly until SET shows on the display.
Press <ENTER> and On (turns on the infrared sensor) or
OFF (turns off the infrared sensor) shows on the display.
Press <UP> or <DOWN> to select the desired option.
Press <ENTER>.
SlimPAR™ HEX 3 IRC User Manual