Invacare Dragon User Manual page 48

•
To adjust the seat height / seat tilt, use the
Allen key 5 mm and the open-end spanner 13
mm to loosen and remove the bolt (1).
•
Adjust the perforated plate to the desired
height/angle.
•
Re-position the bolt and tighten to 40 Nm
using the torque spanner.
On the Dragon with purely manual seat
height and tilt adjustment, the rear
fixation plates can be adjusted to two
different positions, high and low.
The Dragon with electric adjustment
only allows for the low position! If the
fixation plates are set to the high
position, then the electric seat tilt
actuator will collide with the frame of
the wheelchair!
48