NOTE:
Installation is carried out in reverse order. Please ensure that the wheel is re-fitted on the same
side and in the same running direction as removed.
Repairing a flat tyre
•
Unscrew valve cap.
•
Depressurise tyre by pressing in the pin in the valve .
•
Loosen and remove the screw (1) using the 12 mm socket
spanner on the outside and the 13 mm socket spanner on
the inside (for countering).
•
Remove the tyre with inner tube from the wheel rim halves.
•
Repair inner tube and replace, or insert new.
NOTE
If the old inner tube is to be repaired and re-used, and has become wet during repair, you can
make replacement easier by sprinkling the inner tube with a little talcum powder.
109