Invacare Dragon User Manual page 114

•
Apply the wheel rim halves to the wheel again.
•
Inflate the tire a little.
•
Place the cylinder head screws in the wheel rim and tighten the screws with 10 Nm.
Ensure that the inner tube is not clamped between the wheel rim halves.
•
Ensure that the tire is contacting the wheel rim directly.
• Inflate the tire to the recommended pressure.
•
Ensure that the tire is still closely contacting the wheel rim.
• Screw the valve cap on again.
Mounting the wheel
CAUTION Risk of injury from wheels coming loose.
If the drive wheels are insufficiently secured during mounting, they can come loose when
driving.
• When mounting the drive wheels tighten the TX40 countersunk bolts of the drive wheels with
30 Nm.
• Always use new bolts with an undamaged coating.
•
Fit the wheel again.
•
Insert the four new countersunk bolts and tighten with 30 Nm.
114