The swivelling rear perforated plates have five
positions. These are marked on the illustration on the
right by the letters A to E.
If the holding plates are in the low position (see
above), all five positions can be used. In the high
position only positions B, C, D and E are possible! In
position A there is a collision between the holding plate
and the seat frame.
This results in the following seat heights:
Holding plate in the low position:
Position of the perforated plate / seat height:
•
A / 42.5 cm
•
B / 44 cm
•
C / 44 cm
•
D / 45 cm
•
E / 45.5 cm
Holding plate in the high position:
Position of the perforated plate / seat height:
•
B / 49 cm (at 6° seat tilt)
•
C / 47 cm
•
D / 48 cm
•
E / 50 cm
46