46 Daily Usage
5.5 Making timer events
If a multifeed program is provided on the current service, the
multifeed symbol (
Press the
button, then available video tracks will be listed.
Once you select one, it will be presented. At this time, you
have to press the
You can make the digital receiver to present your desired ser-
vice at a specific time. Even if the digital receiver is off, it will
turn on at the specified time.
To add a new timer event, press the
the above figure appears; take the following steps.
1. If you want a radio program, set the Type option to Ra-
dio; otherwise, set it to TV.
2. Set the Satellite option to the satellite which transmits
the service you want. Pressing the
option displays a satellite list, from which you can select
your desired satellite.
3. Set the Service option to the service which provides the
program you want.
option displays a service list, from which you can select
your desired service.
) will be marked on the information box.
button once more to select audio tracks.
To input a timer event, select the
System Setting
Setting menu; then the timer list
will be displayed.
F1
Pressing the
VCR Timer
button, and a box like
button on this
OK
button on this
OK