Searching Services - Topfield TF 5000 CIP User Manual

34 Service Search

4.1.5 Searching services

3. Press the
V
search the designated satellite. As the antenna rotates,
the position pointer at the bottom of screen will indicate
its position. The antenna will stop when it has detected
the designated satellite. This trial might not succeed at
once; you should retry it until it succeed.
4. Tune the antenna fine at the Align Dish option referring
to the Quality bar on the right bottom of screen to get the
highest signal quality.
5. Tune the feedhorn at the Skew option if necessary.
6. Press the
F1
After three satellites are each assigned to their antenna posi-
tions, you should select every satellite you want to catch at
the Satellite Name option. Your selected satellites will be au-
tomatically assigned to their antenna positions.
Selecting LNB Setting option leads you to the LNB Setting
menu. For detailed descriptions of that menu, see § 4.1.1.
Selecting Service Search option leads you to the Service Search
menu. For detailed descriptions of that menu, see § 4.1.5.
With the same method you can get antenna position for one
satellite at the Manual Setting menu.
or button at the Position option to
V
button to save the current antenna position.
To perform service search, se-
lect the Installation
Search menu.
Service