Table of Contents
Advertisement
2.4 Connecting up your digital receiver 11
Connect the antenna cable to the LNB IN
socket.
If you have another digital receiver, link it
from the LNB OUT connector.
If you have a satellite antenna equipped with actu-
ator, you should link the actuator with your digital
receiver.
There are four wires from the actuator. Connect
them to the GND, M1, M2 and PULSE terminals
on the digital receiver.
CAUTION
Wrong connections may break down the actuator.
It is best to have an antenna installer make the con-
nection to ensure safety of it.
Advertisement
Table of Contents
