Topfield TF 5000 CIP User Manual page 39

2. Save the value by pressing the
3. Press the
V
ator then will start to rotate the antenna to the west as
long as it can. Here the
4. Save the value by pressing the
After that, you can configure the actuator settings in two ways.
One is automatic setting, the other is manual setting. In auto-
matic setting you can get antenna positions for all satellites
you want to catch; meanwhile, you can do for only one satel-
lite in manual setting.
If you wish to carry out this process at a stroke, select the Auto
Setting menu; otherwise, select the Manual Setting menu.
In automatic setting, you have to repeat positioning process
for three satellites in the following order:
The positioning process is as follows:
1. Choose your desired satellite at the Satellite Name op-
tion. You should select the easternmost satellite if you
are in the first step.
2. Select the best quality frequency among frequencies used
by the selected satellite at the Frequency option.
4.1 Searching broadcasting services 33
F1
button on the West Limit option; the actu-
button stands for the west.
V
F1
1. For the satellite that is located
on the westernmost.
2. For the satellite that is located
on the midst.
3. For the satellite that is located
on the easternmost.
button when it stopped.
button when it stopped.