Table of Contents
Advertisement
4.1.3 Configuring USALS settings
5. Finally select the Store option at the Motor Control menu
to save the tuned position when the receiving quality
has turned good.
There are more motor control options for installers, but this
manual does not describe them. If you are an installer, refer
them to the manual for the STAB rotor.
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is no
longer required to manually search and store every satellite
position. Just pointing to a known satellite position is enough.
This position will act as the central point. The USALS will
then calculate positions of visible satellites.
To calculate every satellite position, perform the following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Input your location to the My Longitude and My Latitude
options with the
3. Input the position of your selected satellite to the Satel-
lite Angle option if it is not correct.
4.1 Searching broadcasting services 31
To use USALS, select the Instal-
lation
USALS Setting menu.
At first you have to set the Mo-
torized DiSEqC 1.3 option to
Enable.
,
and numeric buttons.
V
V
Advertisement
Table of Contents
