Saving The Configuration Via The Console - Planet GS-4210-8P2T2S Quick Installation Manual

6. Saving the Configuration via the Console
In the switch, the running configuration file stores in the RAM. In the current
version, the running configuration sequence running-config can be saved from the
RAM to FLASH by writing the command or copying the running-config startup-
config command, so that the running configuration sequence becomes the startup
configuration file, which is called configuration save.
1. At the "GS-4210-8P2T2S#" prompt, enter "copy running-config startup-
config" as shown in Figure 6-1.
Figure 6-1: The Configuration Screen
9