Ports & Devices
I/O Ports
AXIS P1346/-E/AXIS P1347 has one input and one output port. for connection of external devices. The ports can be given
descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.
See Unit connectors, on page 45, for information on how to connect external devices.
LED
The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all)
when the unit is accessed. For a listing of all LED behavior, see page 47.
Maintenance
Restart – The camera is restarted without changing any settings.
Restore – The unit is restarted and most current settings are reset to factory default values. The settings that do not reset are:
•
the boot protocol (DHCP or static)
•
the static IP address
•
the default router
•
the subnet mask
•
the product interface language
•
the system time
•
the 802.1X settings
•
the back focus position
Default – The default button should be used with caution. Pressing this returns the camera's settings to the factory default
values (including the IP address).
Upgrade Server – See Upgrading the firmware, on page 48.
Support
Support Overview
The Support Overview page provides valuable information on troubleshooting and contact information, should you require
technical assistance.
System Overview
System Overview is an overview of the camera's status and settings. Information that can be found here includes the
camera's firmware version, IP address, security, event and image settings and recent log items. Many of the captions are also
links to the proper Setup page to conveniently make adjustments in the camera's settings.
AXIS P1346/-E/AXIS P1347 - System Options
42