Advanced Tcp/Ip Settings; Dns Configuration - Axis P1346 User Manual

Services
Enable ARP/Ping setting of IP address – The IP address can be set using the ARP/Ping method, which associates the unit's
MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the
IP address.
Notes:
• The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set.
In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.
• Pinging the unit is still possible when this service is disabled.
AXIS Internet Dynamic DNS Service - Use AXIS Internet Dynamic DNS service to assign a host name for easy access to your
network camera. Click Settings... to register the camera with AXIS Internet Dynamic DNS service, or to modify the existing
settings (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for your
product can at any time be removed.
For more information, please refer to www.axiscam.net and to the online help.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click the View
button to see the current settings.
Use the following DNS server address - Enter the desired DNS server by specifying the following:
• Domain name - Enter the domain(s) to search for the host name used by the network camera. Multiple domains can
be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example,
myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is
the Domain name.
• DNS servers – Enter the IP addresses of the primary and secondary DNS servers.
Note: This is not mandatory with regard to secondary DNS servers.
NTP Configuration
Obtain NTP server address via DHCP - Check this radio button to automatically look up and use the NTP server settings as
provided by DHCP. Click the View button to see the current settings.
Use the following NTP server address - To create manual settings, check this radio button and enter the host name or IP
address of the NTP server.
Host Name Configuration
The network camera can be accessed using a host name, instead of an IP address. The host name is usually the same as the
assigned DNS Name.
Link-Local IPv4 Address
This is enabled by default and assigns the network camera an additional IP address for use with UPnP
both a Link-Local IP and a static/DHCP-supplied IP address at the same time - these will not affect each other.
HTTP and HTTPS
The default HTTP/HTTPS port numbers (80 and 443 respectively) can be changed to any port within the range 1024-65535.
This is useful for simple security port mapping, for example.
AXIS P1346/-E/AXIS P1347 - System Options
38
™
. The camera can have