Table of Contents
Advertisement
Liebert UPS user manual
3.3
Rack-Mount UPS Conversion and Installation
See Figure 7 when installing the Liebert PSI XR in a rack. External battery cabinets are installed in
racks in the same manner.
Figure 7
Convert the Liebert PSI XR for rack installation
Step 1
Step 3
Step 5
WARNING
!
Risk of top-heavy unit falling over. May cause equipment damage, personal injury or death.
Placing heavy equipment near the top of a rack may increase the risk of tipping. Place the
UPS or battery cabinet, if one is being used, in the bottom of the rack.
CAUTION
!
Risk of strain from lifting heavy equipment. May cause personal injury.
Lifting equipment into rack may be a two-person job, depending on weight of equipment.
NOTICE
When rack-mounted, the UPS must be supported by a shelf, slide rails, brackets or fixed rails
on each side. The rack mount handles WILL NOT support the weight of the UPS. They are
used to move the UPS into and out of the rack.
Step 2
Step 4
8
Installation
Hide quick links:
Advertisement
Table of Contents
