C H O O S E The W A H S W T A R E E T M P E A R U T E R; Choose The Wash Water Temperature; Program Table - Simpson Washing Machine User Manual

YOUR PROGRAM GUIDE
Program
*
Heavy Duty
Normal / Heavy
Normal
Delicates
Woollens
Drip Dry
Non-Colourfast
Rinse & Spin
**
Drain & Spin
*
Heavy Duty has a built-in Soak period of 6 minutes
Drain & Spin has a built-in pump out period of approx. 5 minutes prior to spin. (See "Choose the wash program" page 8)
**
Deep uses up to 40% more water than Eco to rinse clothes, but Deep takes less time than Eco. Your wash cycle will be
***
longer using Eco rinse. (See pages 4 and 13)

CHOOSE THE WASH WATER TEMPERATURE

Select this Program
for a heavily soiled cotton wash load.
for a full load of normally soiled cottons.
for an average domestic load of mixed fabrics.
for lingerie, lace, trimmed and embroidered items.
for woollen fabrics labelled 'Machine Washable'.
for items that are to be taken out of the washing
machine dripping wet.
for non colourfast items.
for items that you want to rinse and spin eg clothes
items you have hand washed in a wash tub.
for very wet clothes to remove the water.
For each wash program your washing machine automatically selects a
suitable fill water temperature.
If you want to use a different wash water temperature, press the
WATER TEMP button repeatedly. The water temp lights will tell you
the temperature for each press of the button.
You have three temperatures to choose from ie Hot, Warm and Cold.
The temperature of warm water will depend on the temperature and
pressure of your hot and cold water supplies. The recommended
temperature for warm is 35°C. You can adjust the flow rate of the water
supplies to adjust the Warm temperature.
All rinse water temperatures are cold except for the woollens program.
If you have selected the Woollens program, you will not be able to select
a Hot wash water temperature.
NOTE: If you have a cold water connection only and the hot inlet valve
is capped off (refer installation instructions) you must select Cold washes
only. Otherwise the machine will stop the operation and Eco rinse light
flashing.
IMPORTANT: Components in the washing machine are designed to be
used with water no hotter than 70°C. If your water supply is too hot,
you should have a temperature limiting valve fitted by a qualified plumber.
Wash Water
Temp
Hot or Warm
Hot or Warm
Hot, Warm or
Cold
Warm
Warm
Warm
Cold
_
_
9
Recommended
Rinse***
Wash
Option
Choice
Extra Eco or Deep
Regular
Eco or Deep
Regular Eco or Deep
Regular or Light
Eco or Deep
Deep
Regular or Light
Regular or Light
Deep
Light
Eco or Deep
_
Eco or Deep
_
_