Advertisement
Table of Contents
- 1 Table of Contents
- 2 Important Safety Instructions
- 3 Water Saving Technology
- 4 Knowing Your Washing Machine
- 5 Washing Instructions
- 6 Starting Your Washing Machine
- 7 Programs
- 8 Using Your Washing Machine
- 9 Features of Your Washing Machine
- 10 Caring for Your Washing Machine
- 11 Helpful Hints in Dealing with Washing Problems
- 12 A Guide to Stain Removal
- 13 Troubleshooting
- 14 Warranty
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Simpson EZI Sensor Series
Summary of Contents for Simpson EZI Sensor Series
- Page 1 User Manual...
-
Page 2: Table Of Contents
• A guide to stain removal • Troubleshooting Contact the Customer Care Centre if you need advice. You will find contact numbers on the back page. • Warranty For Service and warranty information see page 17. Simpson Contents... - Page 3 Starts the wash program see page 8. Deselection gives Eco rinse, see pages 3 and 10. Pause the machine during the wash see page 8. Used to Advance to next stage of wash program see page 10. Simpson Control panel...
- Page 4 Puts the washing machine into pause see page 8 Selects and deselects the deep rinse option see page 10. Used to Advance to next stage of wash program see page 10. Deselection gives Eco rinse, see pages 3 and 10. Simpson Control panel...
-
Page 5: Important Safety Instructions
If the electrical cord of this appliance is damaged, it must be replaced by the Manufacturer, Authorised Service Agent or similarly qualified persons in order to avoid a hazard. Simpson Important Safety Instructions / Mains Pressure Water / Information on Disposal... -
Page 6: Water Saving Technology
The recirculation pump will continue to operate for a short time if the lid is opened, allowing you to observe the working water level height in the washbowl. Simpson Water Saving Technology... -
Page 7: Knowing Your Washing Machine
The amount of water for auto is factory set to an optimised level. You can adjust the auto level up or down by a small amount. 10.2 L/kg 14.7 L/kg 22 L/kg (See ‘Customising the Auto-Level’ page 10) (Litres/kg at kilogram rated capacity as tested to AS2040) Simpson Knowing your Washing Machine... -
Page 8: Washing Instructions
4. The load should contain only three or four large items, for example sheets. The rest of the load should be small items. A mixed load of large and small items will wash cleaner than a load of all large items. Simpson Washing Instructions... -
Page 9: Starting Your Washing Machine
The machine will ‘beep’ twice and show a pattern of lights. Wait for this to happen before attempting to operate the machine. Your washing machine is now ready for you to select the wash program settings. Simpson Washing Instructions / Starting your Washing Machine... -
Page 10: Programs
**Drain + Spin has a built-in pump out period of approx. 5 minutes prior to spin. (See “Choose the wash program” above.) ***Deep uses more water than Eco to rinse clothes. (See pages 3 and 10) Simpson Starting your Washing Machine... -
Page 11: Using Your Washing Machine
High X-Low (or any level in between) For the same wash program, Extra Dirty will have a longer wash time than Regular, and Regular a longer wash time than Light & Fast. Simpson Program Times / Using your Washing Machine... - Page 12 If you are using program settings where the recirculation system is not active, the water level will not change when you open the lid. disable it or otherwise change the way it works. Do not try to force open the lid when it is locked. Simpson Using your Washing Machine...
-
Page 13: Features Of Your Washing Machine
'beeping' a lot. Refer to pages 15 & 16 for further information, and what you should do before calling for service. Simpson Features of your Washing Machine... - Page 14 Auto adjust setting WATER TEMP models 955 & 605 light ON a water level 20mm higher than the optimised level WARM factory set, optimised water level COLD a water level 20mm lower than the optimised level Simpson Features of your Washing Machine...
-
Page 15: Caring For Your Washing Machine
IMPORTANT: Never use bleach cleaners or steel wool to clean the stainless steel washbowl. 5. Reassemble the filter to the column and place it back in the centre of the agitator. Simpson Caring for your Washing Machine... - Page 16 Press Start/Pause to begin the cleansing program. Once the machine has filled and agitated for one minute, press Start/Pause and leave it to soak for 3 hours. Press Start/Pause to re-start the program and allow it to run to completion. Simpson Caring for your Washing Machine...
-
Page 17: Helpful Hints In Dealing With Washing Problems
NOTE: Synthetics which have been washed in very hot water will Use of chlorine bleaches on fabrics with resin finishes. not respond to any treatment. Incorrect drying. Incorrect water temperatures ie. too hot or too cold. Simpson Helpful hints in dealing with washing problems... -
Page 18: A Guide To Stain Removal
Brush wools lightly with sandpaper. Tomato sauce Soak in cool water for 10 minutes. Rub in liquid detergent then Same as for whites - use oxygen type bleach. wash. If stain persists, try dry cleaning fluid or bleach. Simpson A Guide to Stain Removal... -
Page 19: Troubleshooting
Lid may be stuck in the locked position If Lid Locked light is OFF, press POWER to turn off machine, then press POWER again - if lid still will not open you should call Service Simpson Troubleshooting... - Page 20 Drain + Spin position to drain the wash bowl. You may have to press START/PAUSE to commence draining. If this problem is repeated, call Service. Electronic fault rInse and DeeP rInse The machine will not do a wash. (BOTH FLASHING) If this fault persists, call Service. Simpson Troubleshooting...
-
Page 21: Warranty
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: SIMPSON EZIsensor TOP LOADING WASHING MACHINE. This document sets out the terms and conditions of product 8. You may not make a claim under this warranty unless the defect claimed is warranties for Electrolux branded appliances. - Page 22 1300 363 640 (AUS) or 09 573 2384 (NZ) or visit our websites at www.simpson.com.au or www.simpson.co.nz Simpson. We are a part of the Electrolux family. P/No. 616-200-532 (119371600) Share more of our thinking at www.electrolux.com © Copyright 2008 Electrolux Home Products Pty Ltd ABN 51 004 762 341...
Need help?
Do you have a question about the EZI Sensor Series and is the answer not in the manual?
Questions and answers