Maintenance And Cleaning - Kruger Alto S User Manual

MAINTENANCE & CLEANING
NOTE: Before servicing or cleaning unit, switch power off at the service panel. This will prevent power
from being switched on accidentally.
Follow these steps below to clean the fans manually
1. Disengage the small grease guard cups from the lters by turning them counter-clockwise.
2. Remove the screw holding the lters in place.
3. Remove the lters from the hood and then the bottom piece of the housing can come off.
4. Remove the wheel center cap and loosen the wheel set screw in order to disengage the wheel
from its motorshaft.
5. Soak all the removed parts for 30 minutes in warm water with liquid soap. Then wash with a
nylon brush or a soft scouring pad. Rinse and dry completely before reinstalling.
NOTE: When reinstalling the fan, align the end of the set screw with the at notch on the motor shaft.
Follow these steps below to clean the exterior of the range hood
Stainless steel is one of the easiest materials to keep clean. Occasional care will help preserve its ne
appearance for years to come.
1. Hot water with liquid soap can remove most stains easily.
2. Always rinse the surface with clean water and wipe dry with a soft clean cloth to prevent water
marks.
3. Harder to remove stains, discolourations, and persistent deposits can be removed with a
non-abrasive household cleaner or stainless steel polishing powder with a little water.
4. For stubborn stains and deposits, use a scouring pad or soft bristle brush along with a
stainless steel cleaner and water. Always rub in the direction of the polished lines, or "grain" of
the stainless steel nish. Avoid using too much pressure as it may mar the surface.
5. Do not allow deposits to remain for long periods of time. Do not use ordinary steel wool or
steel brushes to clean the range hood.
6. Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact
with the stainless steel surface for prolonged periods of time. Many of these compounds
contain chemicals that can be harmful to the stainless steel nish. Always rinse with water
after every cleaning and wipe dry with a clean cloth.
10