Page 1
USER MANUAL ALTO • ENGLISH GETTING STARTED...
Page 2
Thank you for choosing Krüger home appliances! Please follow the recommendations and guidelines contained in this manual. This way the appliance will give you consistent high performance and ef ciency for many years to come. Table of Contents Warnings & Caution Characteristics Installation &...
Page 3
WARNING TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, PLEASE OBSERVE THE FOLLOWING: Installation work and electric wiring must be done by a quali ed professional in accordance with local applicable codes and standards, including re-rated construction. The stainless steel structural housing may have sharp edges.
INSTALLATION & USAGE NOTE: Carefully remove the blue coloured plastic protective lm prior to nal installation. Bracket Installation Draw a vertical line on the supporting wall, from the cooking surface to the ceiling. This will be the center line of which the hood will be mounted according to. Draw a horizontal line at 25 ½”...
Mounting The Hood Hook the body onto the hood mounting brackets. Balance the hood by adjusting the mounting brackets. Gently lower the hood until it securely engages the bracket. Attach the backdraft damper aps to the exhaust outlet at the top of the unit. Be sure that the damper is rmly attached while the aps can move freely.
OPERATION This range hood is operated using a push button switch on the front panel. (from left to right) • Power • Low • Medium • High KT360 • Lights LIGHTING The range hood requires two type JCD, 12V, 20W max, G-4 base, halogen bulbs. WARNING: Always switch off the electrical supply before carrying out any operation or maintenance on the appliance.
Grease Filter NOTE: The grease lter should be cleaned frequently; minimum every two months, or more for frequent to heavy use. Remove the grease lters individually by pulling on the latch. This will disengage the lter from the hood. Tilt the lter downward and remove. Wash the lters, taking care not to bend them.
MAINTENANCE & CLEANING NOTE: Before servicing or cleaning unit, switch power off at the service panel. This will prevent power from being switched on accidentally. Stainless steel is one of the easiest materials to keep clean. Occasional care will help preserve its ne appearance for years to come.