Pvi-Slp Wiring - Heat & Glo SOLARIS36-ST Owner's Manual

Table of Contents

Advertisement

G. PVI-SLP Wiring
NOTICE: Electrical wiring must be done in accordance
with national, provincial, and/or local electric codes.
CAUTION: Risk of shock! Disconnect electrical power
from fi replace/power vent before performing any mainte-
nance, repair, or electrical wiring.
NOTICE:
Electrical service of 120 VAC-60Hz must be
supplied to the junction box of the fi replace in order for the
power vent to operate correctly.
1. Wire Harness
a. Determine the length of the wire harness required to
run between the PVI-SLP and the appliance from the
service parts list.
b. Attach the end of the harness with the loose wires to
the PVI-SLP. Use supplied wire ties to contain all loose
wiring.
c. Attach the end of the harness with the connector to the
appliance.
2. PVI-SLP Connections
Refer to the PVI-SLP wiring diagram (Figure 12.5).
TO PVI CONTROL
NOTE: Use threaded nut to
secure accessory cable to
power vent.
Figure 12.5 Internal PVI Wiring
a. Attach the green wire from the harness to the quick
b. Connect the white wire from the harness to the open
c. Connect the black wire from the harness to the open
3. SOLARIS Connections
Refer to the SOLARIS36-ST and SOLARIS36-MR wiring
diagrams, Figure 12.2 and Figure 12.3. Ensure wire har-
ness has been fastened to the appliance. Route wires and
wire harness in a manner that protects them from contact
with sharp metal surfaces.
a. Attach the white, 3-wire connector to the AUX #2 con-
b. Connect the brown wire to the brown wire coming from
c. Connect the red wire to the red wire coming from the
VACUUM SWITCH
BROWN
RED
GREEN
BLACK
WHITE
Heat & Glo • Solaris • 2179-900 Rev. E • 4/11
ground connect. Connect the red wire to one of the
spades on the vacuum switch. Connect the brown wire
to the remaining spade on the vacuum switch.
female connector on harness, part number 2187-198,
inside the PVI.
male connector on harness, part number 2187-198,
inside the PVI.
nector on the AUX300.
the 8K1-PVI.
8K1-PVI.
QUICK GROUND CONNECT
HIGH LIMIT SWITCH
JUMPER
WIRE
BLOWER
JUMPER
WIRE
AXIAL FAN
FAN
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Solaris36-mr

Table of Contents