Page 1
I N S TA LL ATIO N and S E RVI CE INST RUCTIONS U S E and C AR E INST RUCT IONS B U ILT-IN GA S ON G L A SS H OB S Mo del s: DEGH60BG - DEGH70BG - DEGH90BG distributed by DèLonghi Pty Ltd...
Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance.
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR USE OF ELECTRICAL APPLIANCES Use of any electrical appliance implies the necessity to follow a series of fundamental rules. In particular: ■ Never touch the appliance with wet hands or feet. ■ Do not operate the appliance barefooted. ■...
INSTALLATION CAUTION: ■ This appliance must be installed in accordance with these installation instruc- tions, local gas fitting regulations, municipal building codes, water supply regu- lations, electrical wiring regulations, - Gas Installations and ony other relevant statutory regulations. ■ This appliance shall be only be serviced by authorized personnel. ■...
Page 6
N.B. The connection of the appliance to earth is mandatory. If the installation requires alterations to the domestic electrical system call a qualified elec- trician. He should also check that the socket cable section is suitable for the power drawn by the appliance.
CLEARANCES Installation clearances and protection of combustible surfaces shall comply with the current local regulations e.g. AS/NZS5601 - Gas Installations code. M o d el : D EGH 6 0B G Mod el : D E GH 7 0 B G Figure 3b Figure 3a Mo de l: D EG H9 0 BG...
Page 8
M o de l : DE GH6 0BG 212,5 mm minimum Mo del: D EGH 70B G between the side of the cut-out and the side wall Figure 4a 260 mm minimum between the side of the cut-out and the side wall Figure 4b M od el : DE G H90BG 212.5 mm minimum between the side of...
Page 9
The installation shall comply with the dimensions in Figures 3a, 3b or 3c and 4a, 4b or 4c, bearing in mind that: ■ A partition between the base of the hob and the cupboard below should be fitted 30 mm below the workbench surface if the cupboard is to be used for storage. ■...
FASTENING THE COOKTOP Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 30 to 40mm thick. The kit includes two “F” type brackets (for the front of the cooktop), two “R” type brackets (for the rear of the cooktop) and four self-threading screws “S”...
GAS SUPPLY ■ This appliance is suitable for use with Natural Gas or ULPG (Check the “gas type” sticker attached to the appliance). ■ For Natural Gas the gas supply must be regulated to obtain a pressure of 1 kPa with the two semi-rapid (SR) burners operating at the maximum.
Page 12
Customer Service Centre should be called to obtain the nearest authorized Delonghi Service Agent. Where the appliance data plate cannot be easily read with the appliance in the instal-...
Page 13
TABLE FOR THE CHOICE OF THE INJECTORS Natural Gas ULPG Test Point Pressure 2.75 [kPa] Injector Injector BURNER Orifice Dia. Consumption Orifice Dia. Consumption [mm] [MJ/h] [mm] [MJ/h] Auxiliary (AUX) 0.85 3.60 0.53 3.60 Semi-rapid (SR) 1.12 6.30 0.70 6.30 Rapid (R) 1.45 10.40...
Page 14
CONVERSION PROCEDURE (to convert to Natural gas or to ULPG) REPLACING THE INJECTORS The conversion procedure must be carried out only by an authorised person. This appliance is suitable for use with Natural gas or Universal LPG (check the “gas type” sticker attached to the appliance).
MINIMUM BURNER SETTING ADJUSTMENT Check whether the flame spreads to all burner ports when the burner is lit with the gas tap set to the minimum position. If some ports do not light, increase the minimum gas rate setting. Check whether the burner remains lit even when the gas tap is turned quickly from the maximum to the minimum position.
Page 16
USE and CARE CAUTION: ■ This appliance must be used only for the task it has explicitly been designed for, that is for domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous. Do not use this appliance as a space heater. ■...
■ If after relighting the burner, the flame is still abnormal, turn the burner off and contact our Customer Service Centre to obtain the nearest authorized Delonghi Service Agent. ■ In the case of a mains failure light the burner with a match or lighted taper.
Page 19
LIGHTING GAS BURNERS FITTED WITH FLAME FAILURE SAFETY DEVICE In order to light the burner, you must: Turn the knob (figs. 13a - 13b) in anti-clockwise direction up to the maximum aperture ), push in and hold the knob; this will light the gas. (symbol If there is no mains electrical supply, bring a lighted match close to the burner.
Page 20
CORRECT USE OF TRIPLE-RING BURNER (ONLY FOR THE MODELS DEGH70BG, DEGH90BG) ■ The flat-bottomed pans are to be placed directly onto the pan-support. ■ To use the WOK, you must place the wok stand in the CORRECT position as shown in fig.
Page 21
Do not place anything, e.g. flame tamer, asbestos mat, between pan and pan support as serious da- mage to the appliance may result. Do not remove the pan support and enclose the burner with a wok stand as this will concentrate and deflect heat onto the hotplate.
CLEANING and MAINTENANCE GENERAL ADVICE ■ Before you begin cleaning you must ensure that the hob is switched off. ■ It is advisable to clean when the appliance is cold and especially when cleaning the enamelled parts. ■ All enamelled surfaces have to be washed with soapy water or some other non-abra- sive product with a sponge and are to be dried preferably with a soft cloth.
BURNERS AND GRIDS ■ These parts can be removed and cleaned with appropriate products. ■ After cleaning, the burners and their flame spreaders must be well dried and correctly replaced. ■ It is very important to check that the burner flame spreader and the cap have been correctly positioned.
Page 24
CORRECT POSITIONING OF THE Figure 19 AUXILIARY, SEMI-RAPID AND RA- PID BURNERS It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly positioned (see figs. 18 and 19). ■ They shall be level and must not ro- tate.
Page 25
CORRECT POSITIONING OF THE Figure 23 TRIPLE RING BURNER (ONLY FOR THE MODELS DEGH70BG, DE- GH90BG) The triple ring burner must be correctly po- sitioned (see figs. 21, 22 and 23). ■ The burner ribs must be fitted in their housing as shown by the arrow.
SERVICE AND MAINTENANCE If the ignition spark fails to ignite or does not light the gas, check the following items before calling our Customer Service Centre to obtain the nearest Authorised Delonghi Service Agent: ■ Burner is reassembled and located correctly.
Page 27
Descriptions and illustrations in this booklet are given as simply indicative. The manufacturer reserves the right, considering the characteristics of the models described here, at any time and without notice, to make eventual necessary modifications for their construction or for commercial needs.
Need help?
Do you have a question about the DEGH60BG and is the answer not in the manual?
Questions and answers