Edit Satellites - Nokia MEDIAMASTER 9460 S Owner's Manual

NAVI™ BARS NAVIGATOR
Control

Edit satellites

You can add a new satellite to the system. You can also edit or delete existing sat-
ellites.
To add a new satellite
• Select "Add Satellite".
• Enter the name of the new satellite. (How to enter a name is described on page
19.)
• Enter the orbital position (in degrees) with the numeric buttons.
• Select orientation; East or West.
• Press select to save these settings.
Before you can watch channels from that new satellite you must also carry out the
following steps:
For a fixed antenna:
• Select "Antenna" in the Navigator.
• Follow the instructions on page 13 or 14. Select the new satellite name on line
3 (page 13) or 4 (page 14).
• Adjust the antenna towards the new satellite. Please note: In case of user de-
fined satellite you do not get a TV picture in the background of the screen. When
the Signal Strength is as good as possible:
• Press select to confirm the new settings.
• Press back to return to the Navigator.
• Select "Channel" in the Navigator.
• Select "Manual" or "Advanced" search.
• Enter the settings for transponder frequency, polarisation etc. for the new sat-
ellite.
• You can adjust the dish using channel preview if PID information is entered.
• Press select to start the channel search.
• When you get the message on the screen that "you have found X new TV-chan-
nels and X new radio channels", press select to save the new channels.
The new channels will be saved and added to the TV and radio lists.
When your antenna is controlled by a motor:
• Select "Channel" in the Navigator.
• Select "Manual" or "Advanced" search.
• Select the new satellite name.
• Enter the settings for transponder frequency, polarisation etc. for the new sat-
ellite.
• Adjust the antenna towards the new satellite with "Adjust motor". Please note:
In case of user defined satellite you do not get a TV picture in the background
of the screen. You can get a preview of the TV picture if PID information is en-
tered. Look at the signal strength (AGC) bar to check the signal. When the Sig-
nal strength is as good as possible:
• Press select to start the channel search.
• When you get the message on the screen that "you have found X new TV chan-
nels and X new radio channels", press select to save the new channels.
The new channels will be saved and added to the TV and radio lists.
Edit Satellites
You can change the name of the satellite, position and orientation for a user defined
satellite. In case of predefined satellite only renaming is possible.
Delete Satellite
You can only delete user defined satellites.
When you delete a satellite you also delete the channels belonging to it.
GB 21