Table of Contents
Advertisement
4. O
PERATING
Operation Modes
The unit operates in standalone mode. There is an on/off switch for the color rotation, as well as a rotation
speed adjustment for the water effect.
C
F
ONTROL
UNCTION
On/Off Switch
Rotation speed knob
Note!
The on/off switch is only for color rotation. It will not turn the off the fixture.
Note!
At higher rotation speeds, the operation noise may increase from the fixture.
This is normal.
General Troubleshooting
Symptom
Beam is very dim or not
Clean optical system or replace lamp
bright
Check 230/115 V switch for proper setting
Breaker/Fuse keeps
Check total load placed on device
blowing
Check for power on Mains.
Device has no power
Check device's fuse. (internal and/or external)
Make sure you have the correct audio mode on
Fixture is on but there
the control switches. If audio provided via ¼" jack,
is no movement to the
make sure a live audio signal exists
audio
Adjust sound sensitivity knob
Moves slow
Check 230/115 V switch for proper setting
If you still have a problem after trying the above solutions, please contact CHAUVET Technical
Support at the location on the next page.
Abyss™ LED User Manual
I
NSTRUCTIONS
D
ESCRIPTION
Turns the color rotation on/off (may stop at any position,
including split colors)
Adjusts the speed of the water effect from slow to fast
Solution(s)
5
Applies to
Foggers &
Lights
Controllers
Snow
6/1/2009 11:15 AM
Dimmers &
Chaser
Advertisement
Table of Contents
