Setup; Fuse Replacement; Mounting; Orientation - Chauvet Abyss Led User Manual

Hide thumbs Also See for Abyss Led:

Table of Contents

3. S

ETUP

Disconnect the power cord before replacing a fuse and always replace with the

same type of fuse.

With a flat head screwdriver, wedge the fuse

holder out of its housing. Remove the blown

fuse from its holder and replace with the exact

same type of fuse. Insert the fuse holder back

in its place and reconnect power.

This fixture may be mounted in any safe position.

It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable "C" or "O"

type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding

the desired position, retighten both knobs.

When selecting an installation location, consider ease of access to the unit for operation and

routine maintenance.

Always use safety cables.

Never mount the unit in places where it may be exposed to

rain, high humidity, extreme temperature changes or restricted

ventilation.

The clamp is sold separately

Abyss™ LED User Manual

The fuse is located

inside this

compartment.

Remove using a flat

head screwdriver.

Hanging Clamp

6/1/2009 11:15 AM

Table of Contents