Operating Instructions; Configuring The Starting Address; Control Panel Functions - Chauvet SlimPAR PRO VW User Manual

4. O
PERATING

Configuring the Starting Address

Control Panel Functions

4. Operating Instructions

I
NSTRUCTIONS
The SlimPAR™ Pro VW fixture uses 7 DMX channels in its maximum setting. In this DMX
configuration/personality, the highest channel that the fixture may be set to in order to function
properly is 506. Any address higher than this will prevent access to all of the channels, while in this
mode; however, if you desire to use one of the other DMX channels configurations (personalities),
please consider the total DMX channels when selecting a DMX address.
If this is your first time using DMX, we recommend reading the "DMX Primer" section in the
"Appendix".
Access control panel functions using the four buttons located directly underneath the LED display
on the included wired remote.
B
UTTON
Used to scroll through the
current operating mode,
<MENU>
as well as back out of the
current menu option
Used to select a move to
the right in the menu map
<ENTER>
and select a value and
store it to memory
Used to select increasing
<UP>
advancement in the value
Used to select decreasing
<DOWN>
advancement in the value
The Control Panel shows the current state of the unit. It is used to select the operating
mode, as well as the sub-features. For a detailed layout of the control panel functions,
please see the "menu map" section.
F
UNCTION
10
MENU ENTER UP DOWN
11/24/2010 4:15 PM