Selecting A Radio Station; Scan: Scanning The Frequency Band; Preset List - Garmin Skoda Navigation User Manual

The frequency can be changed in steps of 0.1MHz (FM) or 9kHz (AM).
Tap briefly on
►
the frequency by one step.
Tap longer on the buttons to change the frequency by several
►
steps.
Tap on
►
12.1.3

Selecting a radio station

Instead of setting a specific frequency you can search manually for
radio stations.
Note: In the car radio you can set whether the radio station search
function is to search for all stations or whether only the stations in the
memory list are to be searched through. For details refer to the manual
issued for the radio.
In the R
►
the next higher frequency at which a radio station can be received.
In the R
►
for the next lower frequency at which a radio station can be
received.
When the phasing in of traffic messages is activated (TP), only those
radio stations which transmit traffic information are found.
12.1.4

Scan: Scanning the frequency band

The navigation device offers the possibility of scanning the current
frequency band automatically. Each radio station found is played for
several seconds before the next is searched for.
1. In the R
The search begins. As long as searching is in progress, the Scan
button is highlighted in colour (black). Also, the word Scan is visible
at the top edge of the screen.
2. Tap again on Scan when you find a radio station you like.
The search is ended.
12.1.5

Preset list

For each frequency band there are 12 memory locations at which you
can save your favourite radio stations.
Media
(Back) in order to return to the R
window tap on
ADIO
window tap on
ADIO
window tap on Scan.
ADIO
User's manual maps + more
(Up) or
(Tuning up) to search for
(Tuning down) to search
(Down) to change
window.
ADIO
- 99 -