Switching The Navigation Device On And Off; Device Mounted In The Vehicle; Switching On The Device - Garmin Skoda Navigation User Manual

Skoda navigation
Table of Contents

Advertisement

The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.
Calculation of the current position and its representation on the map
take place approximately once every second. In other words, your
current position is always shown on the map.
3
Switching the navigation device on and
off
The navigation device can be in one of four states:
On: The navigation device is on and can be operated.
Screensaver: The navigation device is on. However, you see only
a screensaver. As long as the screensaver is visible, the device
cannot be operated.
The screensaver is available only when the device is mounted in
the vehicle.
If you switch on the screensaver while navigation is in progress, you
will continue to hear the navigation announcements from the
device.
If music is being played when the screensaver is switched on, the
music will continue.
Standby: When you switch the navigation device to standby mode,
the next time it is switched on it will start very quickly. In standby
mode the device still consumes a small amount of energy however.
Depending on how full the battery is, it can become flat within a few
days or a few weeks.
Off: When you switch off the device, it consumes no energy. It can
then take several months for the battery to become flat. Switching
the device on again triggers a restart which can take some time
(approx. 60 seconds). Your settings and your saved destinations
and routes will be retained.
The procedure for switching the navigation device on and off depends
on whether it is mounted in the vehicle or not.
3.1

Device mounted in the vehicle

When the navigation device is mounted in the vehicle, it does not need
to be switched on or off.
3.1.1

Switching on the device

The navigation device switches on when you switch on the ignition.

Switching the navigation device on and off

User's manual maps + more
- 15 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Move&fun

Table of Contents