Selecting The Period; Status; Opening The Status Window; Configuring The Status Window - Garmin Skoda Navigation User Manual

User's manual maps + more
On the button at the bottom edge of the screen you can see whether
the indicated data are for the current trip (Since start) or for the period
since the data were last reset (Long term).
11.4.2

Selecting the period

In the T
with Since start or with Long term).
Select the period for which you want the data to be presented.
Since start: This period will always begin again when the ignition
►
has been off for 2 hours or more.
Long term: This period will always begin again when you press and
►
hold the reset button of the day odometer on the vehicle's
instrument panel for at least 5 seconds.
11.5

Status

The navigation device can show two round instruments. You can
configure which instruments are shown.
11.5.1

Opening the Status window

1. If necessary, tap on
window.
2. In the S
The S
11.5.2

Configuring the Status window

The navigation device can show the following instruments:
RPM gauge
►
Coolant temperature
►
Outside temperature
►
Note: It is possible that your vehicle does not support all the
instruments which can be shown by the navigation device. In this case
the choice will be limited.
1. In the S
left round instrument.
- or -
In the S
►
right round instrument.
- or -
In the S
►
to reconfigure.
- 96 -
window tap on the Period button (it is labelled
RIP COMPUTER
window, tap on Car info > Status.
TART
window opens.
TATUS
window tap on Car info > Gauge 1 to configure the
TATUS
window tap on Car info > Gauge 2 to configure the
TATUS
window tap on the round instrument which you want
TATUS
(Main menu) to open the S
TART
Car info