Telephone operation
end PTT
For one-to-one PTT, both initiating and destination handsets can end PTT.
For one-to-all PTT, the initiating handset can end the PTT call for all
handsets on the PTT call. If any one of the destination handsets leaves the
PTT call, the call continues until all participants or the initiator hangs up.
To end or leave PTT:
Press OFF/
CLeAr
handset screen shows Push to talk ended.
After PUSh TO TALK is released, the PTT call remains open for a short
time. If no one presses PUSh TO TALK within 10 seconds, the PTT call
ends automatically.
Answer an incoming call during PTT
If you receive an incoming outside call during PTT, there is an alert tone.
•
During a one-to-one PTT, press
handset. The PTT call ends automatically and the outside call is answered.
•
During a one-to-all PTT, press
call ends automatically and the outside call is answered.
•
During a one-to-all PTT, press
handsets and that handset answers the outside call. The PTT call
continues for the rest of the PTT participants.
•
To leave the PTT call without answering the incoming call, press
OFF/
. The telephone continues to ring.
CLeAr
Make an outgoing call during PTT
•
During a one-to-one PTT, press
ends automatically.
•
During a one-to-all PTT, press
call ends automatically and you get a dial tone.
•
During a one-to-all PTT, press
handsets and that handset gets a dial tone. The PTT call continues for the
rest of the PTT participants.
or place the handset in the telephone base or charger. The
/
on the initiating or destination
FLASh
/
on the initiating handset. The PTT
FLASh
/
on any one of the destination
FLASh
/
to get a dial tone. The PTT call
FLASh
/
on the initiating handset. The PTT
FLASh
/
on any one of the destination
FLASh
27