Telephone operation
Find handset
Use this feature to page all system handsets.
Press /FIND hANDSeT on the telephone base. All
1.
idle handsets ring and the screens show ** Paging **.
2.
To end paging, press
keys (0-9, #,
TONe
the telephone base.
Paging rings all the registered handsets even if the ringer
volume is set to off.
Call waiting
When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
Press
/FLASh to put your current call on hold and take the new call. Press
/FLASh at any time to switch back and forth between calls.
equalizer
The equalizer feature on the handset enables you to
change the audio quality of the handset to best suit your
hearing.
While using the handset, speakerphone or intercom,
eQ to select the equalizer setting Treble 1,
press
Treble 2, Bass or Natural (the default setting) for the
handset. The current setting is shown on the handset
for two seconds.
/
,
, any dialing
FLASh
), or press /FIND hANDSeT on
18