Transfer/Share A Call Using Intercom - VTech LS6315 User Manual

Telephone operation

Transfer/share a call using intercom

During a call, press MeNU/SeLeCT twice to choose > Intercom. The
1.
outside call is put on hold automatically.
• If you have a two-handset system, your handset screen shows Calling
other handset.
• If you have more than two handsets, your screen shows
INTerCOM TO:. Use the dialing keys to enter the destination handset
number. Your handset screen shows Calling handset X.
The destination handset rings and its screen shows Other handset is
calling or handset X is calling.
2. To answer the intercom call, press
keys (0-9, #,
show Intercom. You can now have a private conversation between the
system handsets.
• If you want to cancel an intercom call and reconnect to the outside call
before the destination handset answers, press
your originating handset.
• If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, your originating
handset screen shows Unable to call. Try again and reconnects to the
outside call automatically.
3. From this intercom call, you have the following options:
To transfer the call, press MeNU/SeLeCT twice on
•
the originating handset to choose > Transfer. The
originating handset screen shows Call transferred.
The destination handset is automatically connected
to the outside call.
To share the call, press MeNU/
•
then press /
/SeLeCT. Both originating and destination handsets are connected
MeNU
to the outside call.
To end the outside call, press OFF/
4.
telephone base or charger. The call will not end until all handsets hang up.
) on the destination handset. Both handsets now
TONe
or
VOL VOL
/ ,
FLASh
on the originating handset and
SeLeCT
to highlight > Share call. Then press
/
CID
or place the handset in the
CLeAr
22
or any of the dialing
/ or
OFF/
FLASh
>Transfer
Share call
on
CLeAr