Channel +/- Simulation - One for All URC-8550 User Manual & Code Book

Advanced Functions
CHANNEL UP/DOWN SIMULATION
If your original remote control did not have channel up/down keys, it is
possible to program the Topline 8 to operate this feature. By following the
instructions below, you will be able to use the Channel+/- keys on the
Topline 8 to advance though channels 0 through 9.
To turn on the Channel +/- Simulation feature:
1
Press and hold MAGIC until the display reads [TIMED
SEQ].
Press the Menu- key twice until the display changes to
2
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
3
Press the Menu+ key one time until the display changes
to [CH +/- SIM]. Press ENTER and the display will read
[DISABLE].
4
Press Menu- one time to change the display to [ENABLE]
then press ENTER.
Note: To reset the Topline 8 back to the original channel +/- operation,
repeat steps 1-4 above. During step 4, use the Menu- to choose [DISABLE],
then press ENTER.
26