Clearing The Master Power Macro; Re-Assigning Device Keys; Using Channel Scan - One for All URC-3021 User Manual

CTGAE3P 3021 manual booklet
PROGRAMMING A MASTER POWER MACRO (cont'd)

Clearing The Master Power Macro

1.
2.
3.

RE-ASSIGNING DEVICE KEYS

The One For All 3 Device Universal Remote Control can be set to control a
DVD player and a VCR (or a PVR) or a second DVD player by re-assigning
the unused
CBL/SAT
1.
2.
3.
4.
NOTE: Only one device can be assigned to an unused device key at a time.

USING CHANNEL SCAN

In the or
CBL/SAT
channels. Or, if programmed, use the
channels to view a desired channel (see
on next page. )
1.
2.
3.
Press and hold until the
SET
then release .
SET
Enter - - . The
9 9 5 LED
once.
Press and hold until the
SET
. The
Master Power Macro
SET
key as follows:
On the remote control, press and hold
(red light) blinks twice, then release
Enter - - . The
9 9 2 LED
Press once.
DVD/VCR
Press once.The
CBL/SAT
is now ready to be set up to control your VCR (or PVR) or
second DVD player.See
8.
mode, use the
TV FAV
Press or once.
CBL/SAT TV
Press once.
FAV
• If Favorite Channel Scan has been set up,scanning of favorite
channels will start with up to 100 channel changes or until
stopped by pressing any key.
• If Favorite Channel Scan has not been set up, scanning
will start with the current channel, and continue up to
100 channel changes or until stopped by pressing any key.
To stop scanning channels at any time, press any key once.
11
5/24/04 12:46 PM
(red light) blinks twice,
LED
will blink twice. Then press
blinks twice, then release
LED
is now cleared.
SET
.
SET
will blink twice.
will blink twice.The
LED
Programming Device Control
key to start a 3-second scan of all
key to scan only your favorite
FAV
Programming Favorite Channel Scan
Page 11
POWER
until the
LED
key
CBL/SAT
on page