Sleeptimer - One for All URC-8550 User Manual & Code Book

Advanced Functions

SLEEPTIMER

Sleeptimer is a feature which comes built into many TVs and Satellites. It
allows you to set your device to turn off within a certain amount of time.
This feature comes in handy if, for example, you enjoy falling asleep with
your television on.
With the Topline 8, there are two ways to use the sleeptimer. If your TV or
Satellite came with this feature built in, follow the instructions "Device
Sleeptimer" below. If your device did not come with this feature, follow the
instructions "Topline 8 Sleeptimer".
Device Sleeptimer
If your TV or Satellite has a "Sleeptimer" function built in, you can access
this function with your Topline 8 remote. To do so:
1
Make sure your TV (or Satellite) is switched on.
Press the DEVICE KEY (TV or SAT).
2
3
Point the Topline 8 at your TV (or Satellite) and press and
release SHIFT then POWER. You should see the Sleeptimer
activate on your TV screen. To increase the timer, simply
press power until the timer gets to the desired time.
To deactivate the Sleeptimer, repeat steps 1-3 above. During step 3,
continue pressing Shift then Power until the timer indicates zero minutes.
Note: Remember, your device must have its own Sleeptimer function in
order for the above instructions to operate. If your device does not have
its own Sleeptimer, follow the instructions outlined below.
23