One for All URC-8550 User Manual & Code Book page 24

Advanced Functions
The Topline 8 Sleeptimer
Your Topline 8 remote comes with an internal Sleeptimer function for those
devices (TV or Satellite) which did not come standard with this function. To
use the Topline 8's Sleeptimer:
Making your Topline ready for Sleeptimer:
1 Press and hold MAGIC until the display reads [TIMED
SEQ].
2
Press the MENU- KEY twice until the display changes to
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
3 Press the MENU+ key four times until the display
x 4
changes to [SLEEP LOCK]. Press ENTER and the display will
read [DISABLE].
4
Press MENU- one time to change the display to [ENABLE]
then press ENTER to return to the main screen. It is only
necessary to perform steps 1-4 once. Now to set the timer,
continue will the steps below.
Setting the Topline 8's Sleeptimer:
It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this, first
make sure your TV (or Satellite) is switched on. Then,
1
Press SHIFT and then POWER. The display will read [SLEEP
15]. To increase the timer, use the MENU+ key.
2
Once you have set the timer to the desired time, press
ENTER. The display will read [SLEEP and the time]. Now
set the Topline 8 remote down, pointing it at your device.
When the programmed amount of time has elapsed, the
Topline 8 will send the command for Power, hence
turning off your device.
Notes:
- To deactivate the Sleeptimer, press Power on the Topline 8.
- Also, it is only necessary to follow steps 1-2 above one time. For
subsequent use of the Sleeptimer, simply begin with "Setting the
Sleeptimer".
- Remember, when using the Topline 8's Sleeptimer, you must set the
remote so it is pointing at your device.
24