Deleting A Timed Sequence; The Shift Key; Shifted Functions; To Delete A Timed Sequence - One for All URC-8550 User Manual & Code Book

Advanced Functions

To delete a Timed Sequence:

1
Press and hold MAGIC until the display screen changes
to [TIMED SEQ]. Press ENTER and the display will change
to [ADD SEQ].
2
Press MENU- once and the display will read [DEL SEQ].
Press ENTER.
The display will then change to [DEL (the Day, W = Weekly
3
or D = Daily) and the time of the sequence]. If this is the
selection you would like to delete, press ENTER. The
display will read [DELETED] and then go to the next timed
sequence in memory.
4
Press ESC to save your changes and return to the main
screen.

THE SHIFT KEY

There are many features on the Topline 8 keypad which can be accessed
using the SHIFT key. For example, to use the Swap function of your PIP, you
would press: SHIFT then NORM
The following keys have functions that are shifted:
KEY: SHIFTED FUNCTION:
POWER: SHIFT THEN POWER = SLEEP
VOL +/-: SHIFT THEN VOLUME +/- = COLOUR +/-
CH +/-: SHIFT THEN CH +/- = BRIGHTNESS +/-
PIP: SHIFT THEN PIP = FREEZE
PP: SHIFT THEN PP = MOVE
NORM: SHIFT THEN NORM = SWAP
MENU+: SHIFT THEN MENU+ = CENTER+
MENU-: SHIFT THEN MENU- = CENTER-
MENU LEFT: SHIFT THEN MENU LEFT = DELAY-
MENU RIGHT: SHIFT THEN MENU RIGHT = DELAY+
Notes:
- Once you have pressed the SHIFT key, the Topline 8 will remain in the
Shift mode, indicated by the S on the LCD screen, for 5 seconds after the
last key press, or until the SHIFT key is pressed again.
- Remember, in order for you to access the PIP features with the Topline 8,
your original remote control must have had these features.
22