Cinema Projector: User Manual
iS15-2K
Cleaning the projector and lens
Turn the projector off before cleaning:
•
Switch the projector into Standby mode, by pressing the POWER button on the
control panel or the POWER OFF button on the remote control for two seconds.
•
The ON/STANDBY indicator on the control panel will change to orange, and
flash on and off.
The display will show the Cooldown timer, which will count down from
300 seconds to zero. At the end of the cooling period, the projector will go into
Standby mode.
•
Push the main power switch downwards to switch off the power.
•
Disconnect the power cable.
Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild
detergent.
Use a blower or lens paper to clean the lens, taking care not to scratch the glass.
page 5.5
5. Maintenance
Notes
Never use strong detergents
or solvents such as alcohol
or thinners to clean the
projector and lens.