Fitting The Lamp Duct Box - NEC iS15-2K User Manual

Cinema Projector: User Manual
iS15-2K

Fitting the lamp duct box

If the lamp duct box is to be used to duct the hot exhaust air from the lamp, this
should be fitted using the four screw holes in the lamp compartment door.
Standard 200mm ducting can be used to connect the box to the projection room air
extraction system.
Duct box
fixing holes
page 2.23
2. Installation
Notes
If the projector must be
mounted close to people or
heat sensitive equipment,
then external ducting will be
required to remove the hot
exhaust air safely.
Installation of the lamp duct
box should be carried out
ONLY by certified service
personnel.