2. Installation
Mounting the projector
The four adjustable feet under the chassis allow the projector to be lowered onto a
flat surface without any danger of hands being trapped between the carrying handle
and the surface.
Levelling
Once in position, adjustment of projector level should be made by turning the four
feet under the chassis
Adjustable
foot
iS15-2K
page 2.22
Cinema Projector: User Manual
Notes
BEFORE INSTALLING THE
PROJECTOR, READ ALL THE
WARNINGS BELOW AND ALL
THOSE IN IMPORTANT
INFORMATION AT THE
FRONT OF THIS MANUAL.
The projector weighs over
100kg (200lbs). Use safe
handling techniques when
lifting the projector.
Make sure that the surface
that is to support the
projector is capable of
supporting the combined
weight of the projector and
lens (see specification for
weights).
Do not place heavy objects
on top of the projector
chassis. The projector chasis
is NOT capable of
withstanding the weight of
another projector.
Do not tilt the projector more
than ±12° from side to side
when in use, as this may
cause serious lamp failure,
damage the lamp module and
cause extra cost on
replacement. The projector
my be tilted forwards and
backwards as necessary.
±12°
360°