Dvi-D Input Connection - NEC iS15-2K User Manual

Cinema Projector: User Manual
iS15-2K

DVI-D Input connection

1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2 Shield
4 unused
5 unused
6 DDC Clock
7 DDC Data
8 unused
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1 Shield
12 unused
13 unused
14 +5 V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0 Shield
20 unused
21 unused
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
* Hot plug detect (HPD) is fully DVI compliant. DVI sources detect the presence of
a display device by providing +5V on pin 14 and looking for +5V on pin 16.
Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be
held at +5V.
EDID is available even when the projector is switched off.
Operational means that the projector is powered up. Non operational states are
powered down and some self test and reprogramming modes.
pin view of female connector
page 6.11
6. Appendix
Notes
For more information about
supported input formats see
Specification, earlier in this
section.
For more information about
connecting the projector,
including examples of DVI input
configurations, see Connecting
the projector, in
2. Installation.
Cable complexity and
interference can be reduced by
using the Digilink high
bandwidth optical connection
system. Contact your dealer for
more information.