Table of Contents
Advertisement
Mounting the Projector
1
Attach the Fixed Ceiling Part to the Ceiling
First, partially tighten the four screws, then tighten the screws
firmly after positioning.
WARNING!
Use M8 bolts for the fixed ceiling part.
Use of types other than M8 could
cause the projector to fall.
2
Attach the Projector Mounting
Adapter to the Projector
Remove the two screws from the front
panel and open the projector mounting
adapter. Use three M4 screws to mount the
projector mounting adapter.
When using a magnetic screwdriver,
*
insert the screwdriver and screw through
the open hole at the top side of the plate
and tighten without opening the projector
mounting adapter.
Next, close the projector mounting adapter
and tighten the two screws on its side.
WARNING!
Be careful not to catch your fingers
when opening or closing the
projector mounting adapter.
Please use the specified screws;
use of screws other than those
specified may damage the projector.
Fixed ceiling part
M4
*
M4
10
*
Advertisement
Table of Contents
