Charging The Handheld Touchscreen; Charging When Docked; Charging Using Linkconnect Portable Cable; Charging Using Micro Usb Power Supply - ETC PARADIGM Configuration And User Manual

Charging the Handheld Touchscreen

Charging of the Handheld Touchscreen will be required as part of normal use. Typical battery life
will be 4 hours of use time, 8 hours of Standby time. The Handheld Touchscreen can be charged
using three methods; docked to the Docking Station, connected by a LinkConnect Portable Cable,
or through a micro USB charger (not included).

Charging when Docked

When the Handheld Touchscreen is docked to the Docking Station, charging times will vary
depending on use and Docking Station power source.
• When in standby mode, charging time is approximately 8 hours.
• When powered off, charging time is approximately 4 hours.
N o t e :
To charge, dock the Handheld Touchscreen to the Docking Station. Press the Power button twice to
display the Status Display. The battery level indicator is provided on the bottom right corner of the
status icons.
Charging using LinkConne ct Portable Cable
When the Handheld Touchscreen is connected to a Unison Heritage Portable Receptacle station
using a LinkConnect Portable Cable, charging times will be as follows:
• When in standby mode, charging time is approximately 8 hours.
• When powered off, charging time is approximately 4 hours.
To charge, connect the Handheld to the Unison Heritage Portable Receptacle station using a
LinkConnect Portable Cable. Press the Power button twice to display the Status Display. The
battery level indicator is provided on the bottom right corner of the status icons.
Charging using Micro USB Power Supp ly
N o t e :
The Handheld Touchscreen supports charging using any standard 5.5v micro USB power supply
(not included). The power supply must support at least 500mA to properly charge the Touchscreen.
Charging times will vary depending on the output of the power supply.
• Minimum power supply (500mA) will charge the Touchscreen in 10 hours with the unit
powered off.
• A 1,000mA power supply will charge the Touchscreen in 4 hours with the unit powered
off.
To charge, connect a micro USB power supply to the micro USB receptacle on the bottom left edge
of the Handheld. Press the Power button twice to display the Status Display. The battery level
indicator is provided on the bottom right corner of the status icons.
Handheld Touchscreen and Wireless Accessories User Manual
For optimal charging times, the Docking Station should be powered using the
provided power supply.
When connecting to a USB host device, such as a PC, the Handheld Touchscreen
must be powered off to charge using USB power and must charge at a slower rate.
For a faster charge over the micro USB connection, use a 3rd party DC power
supply, such as a phone charger (by others).
37