Table of Contents
Advertisement
•
Act indicator - flashes to indicated the device is operating normally.
LON
This section includes all buttons and indicators that relate specifically to data use.
•
Svc button - sends a service pin message by LinkConnect to the connected processor
•
Svc indicator - illuminates solid when a service pin command has been sent to the
processor.
•
Data indicator - illuminates (flashing) to indicate transmission of data packets when the
Touchscreen is connected to a processor.
SD Card Slot
•
Secure Digital (SD) card slot - this connection is used for local upload and download of
configuration and theme files. The SD card slot supports standard SD and SDHC
cards.
P o w e r / N a v i g a t i o n B u t t o n
The "Power" button on the front of the Handheld Touchscreen has multiple functions,
depending on the state the Handheld is in at the time of use.
Current Handheld State
Powered Off
Standby mode
Normal operation (wake)
Normal operation (wake)
Normal operation (wake)
Pow e r Up
From a powered off state, press the "Power" button one time to power the Handheld
Touchscreen. Application startup can take up to 30 seconds.
S t a n d b y / W a k e
When the Handheld is powered on, pressing the "Power" button once places the
Touchscreen in standby mode, saving the battery power.
When the Handheld is in standby mode, wake the Touchscreen by pressing the "Power"
button once. The Touchscreen resumes normal operation.
Status Display
When the Handheld is powered on, pressing the "Power" button twice displays status icons
and a soft button in the upper right corner of the Touchscreen. Which icons display are
dependant on the status of the Handheld's connection and the configuration. Status icons
are defined on the following page.
Wireless Signal
•
Wireless signal displays on the top left corner of the Touchscree of the current
displayed page. This bar graph displays the wireless signal strength of the connected
device (if any).
6
Action
press power button
press power button
press power button
double press power
button
press and hold
power button for 5
seconds
Result
Touchscreen powers up (application
loading could take up to 30 seconds to
initialize)
Touchscreen wakes to configured page
Touchscreen goes into Standby mode
Touchscreen displays Status icons and a
soft button
Touchscreen powers off
Configuration and User Manual
Hide quick links:
Advertisement
Table of Contents
