Configuration Selection; Modes And Use; Automatic Config Selection; Manual Config Selection - ETC PARADIGM Configuration And User Manual

Configuration Selection

The Handheld Touchscreen can be configured to automatically change the configuration
depending on the strongest wireless signal or for manual configuration selection by a user.
By default, the Handheld Touchscreen is set to Automatic Config Selection.
M o d e s a n d U s e
Power-up behavior depends on whether the Handheld is setup for Automatic or Manual
configuration selection.
N o t e :
A u t o m a t i c C o n f i g S e l e ct i o n
When the Touchscreen is powered-up, it begins the search for all wireless signals
connected in the system. The Touchscreen will automatically connect to the strongest
wireless signal detected. After connecting, the Touchscreen will begin loading the
associated configuration.
N o t e :
M a n u a l C o n f i g S e l e c t i o n
On power up, the Touchscreen displays the "Select Configuration" page. Access to the
"Select Configuration" page is also possible anytime by touching the Wireless Status soft
button. This page includes a listing of all wireless devices, such as Docking Stations and
Wireless Access Stations, that have configurations that can be loaded to the Touchscreen
as well as access to the
16
All wireless devices must be on the same HF Channel to communicate. Reference
the Paradigm LightDesigner online help system or the Paradigm Architectural
Control Processor Configuration Manual for information to change the HF
Channel in Handheld Touchscreen wireless accessory products.
If the Handheld does not have the configuration and theme file, you will be
provided the option to download the files from the connected processor. The most
efficient method to load configuration and theme files is to use removable media.
See "Configuration and Theme Files" on page 14.
Setup Menu.
Configuration and User Manual