Calibrate Touchscreen; Sound - ETC PARADIGM Configuration And User Manual

C a l i b r a t e T o u c h s c r e e n
The Screen tab provides a [Calibrate Touchscreen] button that when pressed, launches
the calibration display. This display is provided as a tool for recalibrating the touch
behaviors on the Touchscreen.
Calibration may be required if presses on the Touchscreen are recognized in an area other
than where the screen was pressed.
N o t e :
To calibrate the Touchscreen, simply touch as close to the center of the "+" symbol as it is
displayed. The "+" symbol will move to five separate coordinates on the touchscreen to
complete the calibration.
When all five coordinates have been calibrated, press [Close] to return to the previously
displayed page. If you are unsatisfied with the calibration results, press [Recalibrate] to
start the calibration again or press [Clear] to clear your settings.

Sound

The Sound tab provides a volume control for the master volume level of the Touchscreen's
built-in speakers.
Handheld Touchscreen and Wireless Accessories User Manual
Pressing and holding the [Mode] button (located behind the
Touchscreen) for four seconds launches the calibration display.
Access Panel of the
21