Configuration And Theme Files; Retrieve The Configuration And Theme Files; Retrieve From The P-Acp; Retrieve From Lightdesigner - ETC PARADIGM Configuration And User Manual

Configuration and Theme Files

Configuration and theme files are stored and recalled locally from the Touchscreen. Each
configuration and theme that will be used on the Touchscreen must be loaded once during
setup or when the configuration or theme is modified.
When a Handheld Touchscreen is connected to the system and it does not have the
associated configuration and theme file for recall, the Touchscreen will prompt to begin
downloading the associated files. When connected wirelessly it is recommended that you
manually load the configuration files using removable media instead. File transfer over a
wireless connection can be slow.
R e t r i e v e t h e C o n f i g u r a t i o n a n d T h e m e F i l e s
Configuration and theme files are available from the Paradigm Architectural Control
Processor (P-ACP) or from within the LightDesigner configuration.
R e t r i e v e f r o m t h e P - A C P
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
R e t r i e v e f r o m L i g h t D e s i g n e r
Step 1:
Step 2:
L o a d i n g F i l e s t o t h e T o u c h s c r e e n
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
14
Insert removable media into the Paradigm Architectural Control Processor, either
USB or SD media.
Navigate to File Operations from the main menu.
Select Save LCD Files.
Select the desired configuration file from the available configurations in the list.
Select the media type for the save operation. Two files types will be exported; the
configuration file saves with a "*.lcdconf" extension and the theme saves with an
"*.lcdtheme" extension.
From the LightDesigner configuration, select "Extract Portable Touchscreen
Files" from the (Project) menu. The Extract Portable Touchscreen Files dialog
displays.
Select which Portable Touchscreen files will be exported from the selection and
click [OK]. The Browse For Folder dialog displays for selection of a location the
files will be exported to, such as a removable USB device. Two files types will be
exported; the configuration file saves with a "*.lcdconf" extension and the theme
saves with an "*.lcdtheme" extension.
Insert the removable media into the appropriate location, SD or USB.
• USB media is located on the bottom left edge of the Handheld.
• SD media port is located behind the
Access the Setup menu by pressing the [Setup] button on the display or by
pressing the Mode button
changes to the "About" tab of the Setup menu.
Press the [Files] button. A keypad displays for passcode entry.
Enter the four digit setup or admin passcode _ _ _ _ to access the "Files" menu.
By factory default, this setup passcode is 3031.
Press the [Config] button to load the configuration file(s) or press [Theme] to
load theme file(s) to the Touchscreen.
Access
(page 5) located behind the
Panel.
Access Panel. The display
Configuration and User Manual