Dock; Ip Addressing; Neuron Id - ETC PARADIGM Configuration And User Manual

Dock

The Dock tab is available only when the Handheld Touchscreen is docked to the Docking
Station.
The Dock tab provides access to view and edit the network settings for the Docking Station.
In addition, this tab is the only place to access the Docking Station Neuron ID.
I P A d d r e s s i n g
Two "IP Addressing" modes are available for use with the Docking Station; Manual and
Automatic.
• Manual - in manual address mode the IP address and settings are user configured. To
change any portion of the address, simply touch inside the field you wish to modify. A
numeric keypad will display for edit of the selected field. Make the modifications to the
selected field then select another field for edit as necessary. Pressing [Ok] saves your
changes, exits the Setup Menu and returns the display to the previous displayed page.
• Automatic Mode - in automatic mode, the Docking Station is configured to obtain an IP
address and other network settings automatically from a connected DCHP server. The
Handheld Touchscreen will display the Docking Station current settings provided from
the connected DHCP server but the settings are not user editable. If no DHCP server
is present, the Docking Station will assign itself a link-local address in the default
169.254.x.x range. Pressing [Ok] saves your changes, exits the Setup Menu and
returns the display to the previous displayed page.
N o t e :
N e u r o n I D
The Docking Station Neuron ID displays at the bottom of the Dock tab. This Neuron ID is
required when binding the Docking Station to the Paradigm Architectural Control Processor
(P-ACP).
Handheld Touchscreen and Wireless Accessories User Manual
Docking Stations must have valid IP Addresses to communicate with the lighting
control system.
33