Robot Coupe R2N Ultra Operation Manual page 2

I. INTRODUCTION
II. ASSEMBLY/DISASSEMBLY
INSTRUCTIONS
III. OPERATING INSTRUCTIONS
IV. PREVENTIVE MAINTENANCE
GUIDE
V. TROUBLE SHOOTING AIDS
VI. SERVICE AGENCY LISTING
INTRODUCTION
The Robot Coupe commercial food processor performs
a host of culinary feats. It is designed for high speed
and quality vegetable processing. The Robot Coupe
slices, juliennes, and shreds with the continuous feed
attachment, plus it will chop, grind, puree, mix, or knead
using the cutter bowl attachment.
This operators manual is broken down into sections
giving you detailed instructions for assembly and op-
eration of the continuous feed attachment and the cut-
ter bowl attachment. Close attention should be paid to
all instructions in this manual to ensure a long life utili-
zation of your food processor.
This manual should be kept within easy
access to all users for reference, and
should be read completely by all first time
users of the machine.
Maintaining the food processor in good working condi-
tion is one of the most important measures to be taken.
Inspect the machine and all parts regularly to make
sure they are in good working condition.
DO NOT operate a machine that has mal-
functioned in any way.
Discard any food processed at the time of
a malfunction
and have the machine inspected and
repaired at one of the Robot Coupe Authorized Ser-
vice Agencies, a list is provided in the back of this
manual. Contact one of these service agencies for all
of your service, parts and accessory requirements.
CAUTION: Your Robot Coupe comes with
a sharp cutting "S" blade and cutting
plates. Always handle with safety in mind.
We suggest that a pair of cut-resistant
gloves be worn when handling the "S"
blade and plates.
Machine Specifications:
The Models R2N and R2N Ultra are equipped with a
high speed motor generating 1 Hp which plugs into a
standard 120 volt/ 60 Hz, 15 amp power outlet. The
full load amperage rating is 7 amps. The machines
are supplied with a 3 Quart bowl. The R2N has a plas-
tic bowl, and the R2N Ultra has a metal bowl. The
machines are supplied with an S-blade and a clear plas-
tic cover, a continuous feed assembly, and two cutting
discs. The machines are equipped with push type on/
off/pulse buttons.
R2N and R2N Ultra
Operation Manual
2