Inputs; Name (Input Name); Enable (Activating Inputs); Link Mode - Lindemann 885 User Manual

Inputs

In addition to the general configuration described earlier, which works equally
on all inputs, you also have the option of adjusting individual inputs to match
different signal sources.

Name (input name)

You can assign whatever name you wish to the inputs. Press the LEFT or RIGHT
button to select the desired input (1-5) and confirm by pressing OK. Now select a
name from the list or enter a name, by confirming CUSTOM. A< will now appear
in the display, at which point you can enter the name you want to use. Use the
UP or DOWN button to select letters or special characters. Use the LEFT or RIGHT
button to move to the letter you wish to change. Names may be up to 8
characters in length. Once you have finished entering the name, confirm it with
the OK button.
Possible names to use:

Enable (activating inputs)

It is always advisable to disable any inputs that are not being used. When
selecting inputs, any input that has been disabled will be skipped.

Link Mode

The 885 is able to communicate with other Lindemann components of the 800
range via SYSCOM. This Link Mode allows a single remote control to be used for
all Lindemann components.
To use this feature, all components must be linked with a SYSCOM cable (see
diagram below). You must switch off all components before changing any
SYSCOM connections, as a re-start is required to ensure that the system
recognizes all of the components.
CUSTOM
CD
SACD
DVD
TUNER
PHONO
TAPE
AV
TV
17
885 Integrated Power Amplifier
SAT
PC
MAC
D680
820
820S
822
825
USBDAC