Controls
(illustrations on page 3)
Controls on the system and
remote control
1
STANDBY ON y
–
to switch the system on or to standby mode.
2
SOURCE
–
to select the respective sound source : CD,
TUNER, TAPE or AUX.
PROGRAM / 9
3
for CD ................. press to stop playback or to
clear a program.
for CD/Tuner ... to enter programming mode.
4
PLAY•PAUSEÉÅ
for CD ................. to start or interrupt playback.
S T
5
for CD ................. press to select a desired track.
................................. press and hold to fast reverse/
forward the disc.
for Tuner ............. press to tune to a lower or
higher radio frequency.
6
REPEAT / SLEEP
for CD ................. to repeat a track/ entire CD.
for Timer ............. to activate/deactivate or set the
sleep timer.
7
Tape deck
8
Tape Deck Operation
â .......................... to start recording.
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback/recording or to
open the tape door.
Å .......................... to interrupt playback or
recording.
9
DSC (DIGITAL SOUND CONTROL)
–
to select the desired sound effect : OF (flat),
RO (rock), PO (pop) or JA (jazz).
0
DBB (DYNAMIC BASS BOOST)
–
to enhance the bass
!
VOLUME (VOL +/-)
–
to increase or decrease the volume.
12
pg 001-024/MME110/37-Eng
@
Display screen
–
to view the current status of the system.
#
n
–
connect headphones.
$
Disc tray
%
OPEN/CLOSE ç
–
to open or close the disc tray.
^
BAND
for Tuner ............. to select waveband : FM or AM.
&
REPEAT
–
to repeat a track / entire disc.
*
SHUFFLE
–
to play CD tracks in random order.
¡ / ™
(
for CD ................. to select a desired track.
for Tuner ............. to select a preset radio station.
)
MUTE
–
interrupts and resumes sound reproduction.
¡
à / á
for CD ................. press and hold to fast reverse/
for Tuner ............. press to tune to a lower or
for Clock ............ to set the hours and minutes.
™
TIMER
–
to activate the timer/clock function.
£
SLEEP
–
press and hold to set sleeping time.
≤
B
–
to switch the system on or to standby mode.
Notes for remote control:
– While the system is in active mode,
select the source you wish to control by
pressing SOURCE key on the remote
control.
– Then select the desired function (for
example É , í , ë ).
12
forward the disc.
higher radio frequency.
8240 009 34241
6/3/02, 12:49 PM