Unpacking; Piece Inventory - Grizzly G1012 Instruction Manual

Unpacking

The Model G1012 Bandsaw is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you have
signed for delivery, please call Customer Service
immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The Model G1012 is a
heavy machine (456 lbs.
shipping
NOT over-exert yourself
while unpacking or mov-
ing your machine – get
assistance.
If moving this machine up
or
machine must be disman-
tled and moved in smaller
pieces. Make sure the
stairs are capable of sup-
porting
weight of the machine
parts and the people mov-
ing them.
Some metal parts may
have sharp edges on
them
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
-8-
weight). DO
down stairs, the
the combined
after they are

Piece Inventory

After all the parts have been removed from the
carton, you should have:
• Bandsaw Unit (see Figure 2)
• Stand Components (see Figure 3)
Top (1)
Legs (4)
Horizontal Braces (2)
Stand Sides (2)
Motor Bracket (1)
Pulley Cover (1)
• Other Bandsaw Components
(see Figure 4)
Table
Motor
Miter Gauge
Fence
Fence Rails (2)
Trunnion Support Bracket
A31, A32, A33 V-Belts
Motor Pulley
Stepped Pulley
Wheel Pulley
Hardware Bags
Figure 2. Bandsaw unit.
G1012 18" Bandsaw